Select Page
Custom Wheels: What They Are and How to Choose Them

Custom Wheels: What They Are and How to Choose Them

A “custom wheel” is a wheel that has been modified according to user preference. These wheels deviate from the vehicle manufacturer standard. The optimization is done as the owner looks for a specific experience from the car. This might be visual appeal, or a higher level of performance. Modifications differ based on these categories.

So what is the best way to choose custom wheels for your car? These are three of the most significant factors you need to keep in mind:

  • Wheel Size

This is one area where size really does matter. Radically bigger wheel size can put undue stress on the brakes, which now have to stop a much larger mass with the same amount of power as before. Steering abilities of your car might be affected as well. On the other hand, wheels that are too small might cause the car to sit too close to the ground, risking damages to the underside, even if smaller rims do help to reduce the overall unsprung weight of the car, thus enhancing performance. In fact, this is such a serious consideration that if you make drastic alterations above and beyond the recommended kumho tyres size given in the manufacturer’s specifications, you might end up voiding your warranty! So make a careful decision by balancing all factors when choosing the size of your custom wheel.

  • Wheel Offset and Centricity

It is important to use rims whose lug nut holes match with your hub’s, to ensure that the offset is preserved. The bolt pattern must be similarly paired. The tyre aspect ratio, or the ratio of the height of the tyre to its width, must be maintained when the rims are being altered. The added stress on the tyres can then be minimized.

  • Wheel Type

And finally, should you go for alloy wheels, or steel rims? Wider rims, or narrower ones? These depend on your usage. For example, sturdy metal rims are inexpensive, albeit somewhat ugly workhorses: they provide strength and are best used for heavy work, or rough-terrain drives. On the other hand, lightweight alloys help increase speed, agility and comfort, while reducing weight and preventing overheating of tyres: a definite plus for those interested in racing, or for those who regularly travel in the maddeningly abrupt stops and starts of urban traffic. Such usage considerations should be accounted for while making a decision. Do yourself a favor, always shop around first to get the best wheels and pirelli tyres australia before buying, many little quality tyre stores run cool special online so be sure to ask around and browse the store for deals before buying.

So there you are- a miniature crash course on the basics of custom wheels, and how to choose them. We hope this article helps!

Choosing Tyres for Your Vehicle

Choosing Tyres for Your Vehicle

Choosing a tyre that meets your budget and your needs can be difficult, but knowing what to look for can make the process easier. By taking a little time to read these guidelines, you’ll learn enough to make an educated decision.

When Do You Need Tyres?

Tyres are considered “worn out” when the tread depth reaches 2/32”. However, in wet areas, 4/32” or less in tread depth can result in a loss of traction. In snowy conditions, traction diminishes at 6/32”; shallower groove and lug depths keep tyres from biting into snow. If tyres are wearing irregularly, they need to be replaced early.

How Many Tyres do You Need?

If you only need one tyre (because of damage or defect, etc.), you should replace it with a tyre of similar brand, load rating and speed rating. If you need to replace two tyres, replace them with a set of better or like quality, and put them on the rear axle. Ideally, you should replace all four tyres at the same time.

Tyre Size

Most people replace old tyres with a set that’s the same size. If you decide to go this route, there are a few ways to learn the size of your tyres. You can look at the sidewalls, or in your car’s owner’s manual. Alternatively, you can find the information on a placard inside your glove compartment or on the door jamb.

Consider Your Conditions

A person living in a warm climate needs different tyres than someone living where it’s cool. However, there are exceptions, and most drivers use their vehicles in a variety of conditions. When buying tyres, consider the conditions in which you drive most often. Most tyres available today are all-season, which work well for most drivers, conditions and seasons.

You can choose tread according to your driving habits, but you’ll sacrifice some ride quality. Many 4WD owners choose all terrain tyres for the balanced ride and traction, but sport tyres with all-season tread designs are quickly gaining popularity.

Speed Ratings

Most people know about tyre speed ratings; simply put, you need the right tyre for the speeds at which you typically drive. If you buy new tyres with a lower speed rating than those already on your vehicle, you’re limiting your vehicle’s top speed and handling capabilities. However, you can improve your car’s handling by buying tyres with a higher speed rating.

Every year, new car and 4WD designs are brought to market, and as a result, tyre makers are coming out with specialized products. For any vehicle, you can choose from durable, comfortable tyres and high-performance, speed-oriented models. By doing your research, you can find car tyres and michelin tyres australia that fit your budget and your driving habits.

Getting a Pair of High-Quality Tyres in Australia Can be Quite a Daunting Task

Getting a Pair of High-Quality Tyres in Australia Can be Quite a Daunting Task

The most common question in the world of tyres is “How many kilometers can I get from my tyres?” There is no correct answer to this as the distance covered depends entirely on your driving style, quality of the tyre compound and the surfaces driven over, etc.

Finding the Right Fit:

If you’re looking for tyres in Australia, you should look at the more reputed retailers and dealership networks in the region. Getting professional help for fitting is also recommended, since it reduces the chances of accidental damage.

Even if you’re looking for cheapest tyres sydney, it is better to opt for discounts rather than go for part-worn or used tyres, since they are more prone to break-apart. New tyres usually last for around 20,000 – 30,000 KM depending on use. Second-hand tyres mostly last for half the distance.

Maintaining the Tyres:

Buying a premium set of tyres won’t solve your problems unless you take proper care of the tyres. The most common practice is to ensure proper air pressure at all times. Do not drive around on leaked tyres, as it may aggravate the problem and may lead to an accident. One of our favorite tyres for our own vehicles is Costco Tyres, check them out! If you’re going to buy rims, make sure you get the correct tyre to fit the rim and driving conditions.

General conditions such as minor tears, protrusions, slashes, bulges, etc, need to be dealt with strictly. Some major driving issues need to be corrected as well. For example, do not accelerate hard and brake harder. Avoid cornering at very high speeds, avoid parking on uneven or raised surfaces and go easy on the gas while crossing speed bumps or potholes, etc. You can enhance the lifespan on your tyres by 20% by following these norms!